€1.64
1,64 € tax excl.
Ball bearing wheel in PA suitable for sliding furniture drawer runners etc.
- Diameter 23 - 25 - 28 - 30 mm
Par de guías correderas para cajones con capacidad de 25 kg, pintadas de blanco
Reference:
GUIDA45B
Sliding fitting for a drawer in black lacquered steel, with lower square fixing
Suitable for the partial extraction of wooden and metal drawers
€5.33
5,33 € tax excl.
Add to wishlist
other products in the same category:
€96.25
96,25 € tax excl.
Anodized aluminium rail Mt 3, capacity 250 kg for KIT 0850/3.
€221.31
221,31 € tax excl.
€5.00
5,00 € tax excl.
Bearing diameter 19 mm
Pad thickness 5.6 mm
Total thickness 24mm
Thickness without screw 18 mm
Screw thickness 6 mm
Screw pitch 5MA
Pin hole with 4MA pitch
Bearings particularly suitable for use...
€358.49
358,49 € tax excl.
Complaining sliding system for 2 doors of 1000 mm for cabinets 2000 mm,
Ground Type Type 5 SLIDER S
Download technical specifications sheet
Visit the website www.bortoluzzi.com
€28.69
28,69 € tax excl.
Kit includes:
Perforated and anodized aluminum rail reach 40 kg length 150 cm
Sliding carriage (2 pieces)
Door anchor bracket (2 pieces)
Carriage support Screw (2 pieces)
Lower guide (1 pieces)
Holding brake...
€108.20
108,20 € tax excl.
Evolution single door, double-staved metal panels DX51 Z100 with thickness 0.7, anodised aluminum rail AW6060 10 micron, fit for a single door, the doors shall be flat and fit for sliding into a pocket wall. Maximum...
€30.33
30,33 € tax excl.
Sliding system for folding door with opening via hinge 1133 for leaves up to 30 kg complete with 1 m aluminum track.
Minimum door thickness 28 mm.
€14.43
14,43 € tax excl.
Koblenz adjustable sliding kit for single leaf 25 mm capacity 40 kg
Accessory Kit with bearing for 1 leaf from 25 mm
The Kit includes:
Adjustable angled carriage with 2 bearings (2 pieces)
Lower eccentric...
Out-of-StockSold out
€51.64
51,64 € tax excl.
Galvanized guide 60x15x3000 30/10 x Drilled for floor fixing
3-meter galvanized guide for Rolling Center Angula floor sliding doors.
The new guide designed and built for gates and doors, suitable for environments...
€25.00
25,00 € tax excl.
360 ° swivel plate with hole Ø30 mm, maximum capacity 150 Kg
€165.57
165,57 € tax excl.
Magic2 is the multi-patented system, designed and produced by Terno Scorrevoli, totally Made in Italy. A product that integrates the magic of architectural minimalism and the smoothness of an extremely tested system -...
€72.50
72,50 € tax excl.
Rail + beam in aluminum 2 mt. with ovals cut for distance from the wall mm.18 for sliding wooden doors.
Material: Anodised aluminum
Finishing: Brushed silver anodized / Black electro color
€7.30
7,30 € tax excl.
U-shaped support in tropicalized iron 50 x 26 x 15 mm
Nylon wheel Ø 30 mm Round groove
Specifications:
Diameter 30 mm
Thickness 10 mm (Thickness with bushing 11 mm)
Round throat diameter 6 mm - radius 3 mm...
€5.74
5,74 € tax excl.
Bottom sliding shoe for custom-made accordion doors, with 12 mm Teflon pin.
The 0700 and 0710 accordion folding systems can be configured in different solutions that vary based on the number of panels to be installed...
€9.84
9,84 € tax excl.
Bathroom Shower Glass Sliding Door Rollers Top & Bottom Wheels
Description:
Diameter of wheels: 27/25mm
Width of wheels: 5mm
Minimum Hole size in the glass: 11mm.
Materials: Plastic, Nylon, 304 stainless...
€7.38
7,38 € tax excl.
nylon wheel 30 mm round gola
specifications:
Diameter 30 mm
Thickness of 10 mm
Round throat diameter 6 mm - 3 mm approximately
Hole Ø 5
€274.00
274,00 € tax excl.
FEATURES:
Steel
Load rating up to 272 kg
100% extension
19.1 mm slide thickness
Slides sold singly
Available in lengths from 254 mm to 1524 mm (SL)
Measures looks image or technical data sheet.
€30.74
30,74 € tax excl.
Kit includes:
Perforated and anodized aluminum rail reach 40 kg length 190 cm
Sliding carriage (2 pieces)
Door anchor bracket (2 pieces)
Carriage support Screw (2 pieces)
Lower guide (1 pieces)
Holding brake...
€10.57
10,57 € tax excl.
Nylon wheel Ø 60 mm with U-shaped groove
Specifications:
- product dimensions: hole 12 mm - diameter 60 mm - thickness 14 mm
- U groove dimensions : width 9.5mm - depth 2,8mm - internal diameter 54mm
-...
€9.02
9,02 € tax excl.
Nylon wheel Ø 47 mm Round groove
Specifications:
Diameter 47 mm
Thickness 8mm
Round throat dradius approximately 1,5 mm
Hole Ø 8
€51.64
51,64 € tax excl.
3-meter round galvanized guide for Rollin Center Floor sliding doors.
Galvanized guide 55x16x3000 35/10 x Round D.20 Drilled for floor fixing
The new guide designed and built for gates and doors, suitable for...
€286.89
286,89 € tax excl.
Sliding kit complete with 3-metre track, for wardrobe sliding system with 3 overlapping doors with 6 air-cushioned stops and 6 snap-on guides for doors up to a capacity of 80kg.
Maximum door thickness 28 mm.
€16.35
16,35 € tax excl.
Sliding trolley with Ø 45 mm wheel and 145x50 mm adjustable support for sliding system of wardrobes and cabinet doors
Material: Aluminum, Nylon
Measurements as per images.
€228.69
228,69 € tax excl.
Magic2 is the multi-patented system, designed and produced by Terno Scorrevoli, totally Made in Italy. A product that integrates the magic of architectural minimalism and the smoothness of an extremely tested system -...
-20%
€4.92
€6.15
4,92 € tax excl.
Nylon wheel Ø 25 mm flat type
Specifications:
- Diameter 25 mm
- Thickness 7 mm
- Hole Ø 6 mm
€6.48
6,48 € tax excl.
nylon wheel 25mm round gola
specifications:
Diameter 25 mm
Thickness of 9 mm
Round throat diameter 5,3 mm
Hole Ø 5
€5.00
5,00 € tax excl.
Wheel diameter 22 mm
Pad thickness 4.2 mm
Total thickness 26mm
Thickness without screw 19.6 mm
Screw thickness 6 mm
Screw pitch 6MA
Bearings particularly suitable for use in shower enclosures...
€21.16
21,16 € tax excl.
Coppia guide per cassetti legno Tandem plus Blumotion ad estrazione totale a scomparsa con chiusura ammortizzata Blumotion
Escluse frizioni aggancio cassetto
€9.02
9,02 € tax excl.
Nylon wheel Ø 48 mm Round groove
Specifications:
Diameter 48 mm
Thickness 9mm
Round throat diameter 6 mm - radius approximately 3 mm
Hole Ø 8
€7.38
7,38 € tax excl.
Upper and lower central hinge for custom-made accordion doors.
The 0700 accordion folding system can be configured in various solutions depending on the number of panels to be installed and their weight. The maximum...
€7.38
7,38 € tax excl.
nylon wheel 35 mm round gola
specifications:
Diameter 35 mm
Thickness of 7 mm
Round throat diameter 5 mm - 1,5 mm approximately
Hole Ø 6
Questions (0)
No customer questions for the moment.
Your Question has been successfully sent our team. Thanks for question!
Ask a question
hide form
Italiano
Français
Deutsch
Español