€109.02
109,02 € tax excl.
Complete kit for sliding glass-front cabinets with 5/6 mm glass thickness.
Gray PVC gasket profile for 1600 Series showcase door
Reference:
8230.01608.3000-1608/GR
3 meter PVC profile for showcase door.
Material: gray PVC
€7.38
7,38 € tax excl.
Add to wishlist
You may also like
€14.75
14,75 € tax excl.
Plastic rail 3 mt. for upper rail Art. 1604 for glass-front cabinets.
Material: Plastic
Finishing: Grey
€2.13
2,13 € tax excl.
Lower carriage delrin wheel for glass-front cabinets.
Material: Metal, DelrinFinishing: Nichel
€17.21
17,21 € tax excl.
Lower rail 3 meter for glass-front cabinets.
Material: Anodised aluminum
Finishing: Brushed silver
€31.97
31,97 € tax excl.
Upper rail 3 meters for glass-front cabinets.
Material: Anodised aluminumFinishing: Brushed silver
€16.31
16,31 € tax excl.
Lock for E-G showcase profiles, Serrature Series, keys available in 150 combinations, on request you can have quantities with a single combination.
Assembly: Remove the front panel, insert the slide and block it at...
other products in the same category:
€181.97
181,97 € tax excl.
Magic2 is the multi-patented system, designed and produced by Terno Scorrevoli, totally Made in Italy. A product that integrates the magic of architectural minimalism and the smoothness of an extremely tested system -...
Out-of-StockSold out
€63.20
63,20 € tax excl.
Sliding system Kit for wooden doors 18 mm distance with 2 patented soft air closing for doors up to 80kg. Aesthetically innovative, this system give a new concept of the external wall slidings, Thanks to the absence...
€7.38
7,38 € tax excl.
Nylon wheel Ø 12 mm flat type
Specifications:
Diameter 12mm
Thickness 3mm
bolt 3 but length 4 mm
€7.54
7,54 € tax excl.
nylon wheel 30mm round gola
specifications:
Diameter 30 mm
Thickness of 10 mm
Round throat diameter 6 mm - radius 3 mm approximately
Hole Ø 8 mm
€3.77
3,77 € tax excl.
Pair of micro guides with balls to be embedded in the wood. Maximum capacity 8 kg. The maximum capacity refers to the maximum load allowed per pair of guides (283 mm) with side mounting. Horizontal mounting of the...
Out-of-StockSold out
€9.84
9,84 € tax excl.
RIGHT replacement white trolley for Blum Tandem 513 - 510 series drawer guide
€1.48
1,48 € tax excl.
Fixed wheel with metal fixing bracket suitable for linear sliding for chests of drawers and furniture in general.
Features:
Wheel 35 mm
Roller width 13 mm
Installation height 41 mm
Load bearing capacity 40 kg...
€84.43
84,43 € tax excl.
Battery arrest at the end of the galvanized cushioned race to pay for sliding gates article 384 Combi
Measures as per images
€13.46
13,46 € tax excl.
Pair of telescopic slides in white painted steel with partial extraction for drawers for horizontal mounting, maximum dynamic load of 35 Kg.
Available size (L): from 300 to 700 mm
Features:
Lateral stability...
€228.69
228,69 € tax excl.
Magic2 is the multi-patented system, designed and produced by Terno Scorrevoli, totally Made in Italy. A product that integrates the magic of architectural minimalism and the smoothness of an extremely tested system -...
€242.21
242,21 € tax excl.
Sliding system for door, wheels with phenolic support and lower U-shaped guide, wall stops and supportsArticle IN.15.258
€7.38
7,38 € tax excl.
nylon wheel 35 mm round gola
specifications:
Diameter 35 mm
Thickness of 7 mm
Round throat diameter 5 mm - 1,5 mm approximately
Hole Ø 6
€18.00
18,00 € tax excl.
Pair of ball bearing guides with total output, telescope mechanism. Maximum capacity 50 kg The maximum capacity refers to the maximum load allowed per pair of guides (mm 550) with side mounting. Horizontal mounting of...
€5.74
5,74 € tax excl.
Sliding fitting for a drawer in black lacquered steel, with lower square fixing
Suitable for the partial extraction of wooden and metal drawers
€5.00
5,00 € tax excl.
Bearing diameter 24 mm rounded profile
Pad thickness 6 mm
Total thickness 27mm
Thickness without screw 20.4 mm
Screw thickness 6.6 mm
Screw pitch 6MA
Pin hole with 4MA pitch
Bearings...
€15.49
15,49 € tax excl.
Wheel for underbed furniture also suitable for the linear movement of furnishing modules.
Features:
With locking brake
Wheel diameter 75 mm
Load capacity 80 kg
Gray Color/Finish
Apply on the internal side of...
Out-of-StockSold out
€5.00
5,00 € tax excl.
Materials:
Outer rings and pins in AVP steel - Coating in Nylon 6/6 loaded with fiberglass - Balls in Cr TMP steel.
- Wheel diameter 22 mm(D),
- Internal hole diameter 6 mm(d),
- Inner ring diameter 10...
€6.97
6,97 € tax excl.
Adjustable built-in sliding trolley with Ø 20 mm nylon wheel, round groove and safety device to prevent the trolley from coming out of the track for cabinet door, plastic half-moon 75x35 mm support.
Specifications:...
€4.10
4,10 € tax excl.
Wheel with G Groove, used for bathroom sliding doors, shower doors etc.
Material: Nylon Wheel, Brass Core
Total size: 10.5x22.5 mm
Thickness: 6.8 mm
Weight: 60g
Groove width: 5mm
Thread: M4
Length of the...
€9.43
9,43 € tax excl.
Nylon wheel Ø 50 mm with U-shaped groove
Specifications:
- product dimensions: hole 8 mm - diameter 50 mm - thickness 12 mm
- U groove dimensions : width 6.5mm - depth 5mm - internal diameter 40mm
-...
€2.52
2,52 € tax excl.
Ø 24 Omge rubberized rounded bearing,
with 6 mm thickness and 11 mm inner hole
€5.00
5,00 € tax excl.
Wheel diameter 22 mm
Pad thickness 6 mm
Total thickness 26.8 mm
Thickness without screw 20 mm
Screw thickness 6.8 mm
Screw pitch 6MA
Materials:
Nylon coated brass outer ring
Brass pin
Ball cage...
€14.75
14,75 € tax excl.
Pair of sliding guide for drawer (DX/SX) Blum Tandembox Antaro/Intivo - Total extraction - Soft closing
Characteristics:
Capacity 30kg (578) or 50Kg (579)
Length: 270/350/400/450/550/600/650 mm
€5.33
5,33 € tax excl.
Radial ball bearing with seals, replacement for cutter Cmt
Article 791.007.00
Specifications:
D - 19 mm diameter
P - Thickness 6 mm
B - Hole Ø 6 mm
€4.84
4,84 € tax excl.
Nylon wheel Ø 15 mm flat type
Specifications:
-Diameter 15 mm
-Thickness 4 mm
-Hole Ø 3
€9.02
9,02 € tax excl.
Nylon wheel Ø 48 mm Round groove
Specifications:
Diameter 48 mm
Thickness 9mm
Round throat diameter 6 mm - radius approximately 3 mm
Hole Ø 8
€4.84
4,84 € tax excl.
System ROLL-GE 20, Adjustable steel roller with M10 pin.
Wheels Ø 24 mm, material:
Steel (Art.23), Steel-nylon (Art.45), Delrin (Art.1223) to complete crown of spheres.
Carrying capacity: 45 kg (Art.23) - 45 kg...
€5.25
5,25 € tax excl.
Radial ball bearing with seals, replacement for cutter Cmt
Article 791.003.00
Specifications:
D - 12,7 mm diameter
P - Thickness 5 mm
B - Hole Ø 4,76 mm
€25.41
25,41 € tax excl.
Partial extraction guide for assembly on the underside of the FR 311 hob, capacity 30 kg. Suitable for drawers and shelves.
Technical data:
- Material steel, painted. white epoxy
- Mounting on the underside of...
€6.48
6,48 € tax excl.
nylon wheel 22 mm round gola
specifications:
Diameter 22 mm
Thickness of 7 mm
Round throat diameter 4,2 mm - 1,8 mm approximately
Hole Ø 6
€10.57
10,57 € tax excl.
Nylon wheel Ø 60 mm with U-shaped groove
Specifications:
- product dimensions: hole 12 mm - diameter 60 mm - thickness 14 mm
- U groove dimensions : width 9.5mm - depth 2,8mm - internal diameter 54mm
-...
€11.48
11,48 € tax excl.
Foot with integrated wheel, for furniture that needs to be moved. By simply lifting the cabinet, the wheel comes out of the foot.
Features:
To be inserted by pressure
Wheel Ø 30 mm
Capacity 30 kg/wheel
Plastic...
Customers who bought this product also bought:
€21.31
21,31 € tax excl.
Aluminium profile 3 meters for glass-front cabinets.
Material: Anodised aluminumFinishing: Brushed silver
€17.21
17,21 € tax excl.
Lower rail 3 meter for glass-front cabinets.
Material: Anodised aluminum
Finishing: Brushed silver
€14.75
14,75 € tax excl.
Plastic rail 3 mt. for upper rail Art. 1604 for glass-front cabinets.
Material: Plastic
Finishing: Grey
€31.97
31,97 € tax excl.
Upper rail 3 meters for glass-front cabinets.
Material: Anodised aluminumFinishing: Brushed silver
€109.02
109,02 € tax excl.
Complete kit for sliding glass-front cabinets with 5/6 mm glass thickness.
€16.31
16,31 € tax excl.
Lock for E-G showcase profiles, Serrature Series, keys available in 150 combinations, on request you can have quantities with a single combination.
Assembly: Remove the front panel, insert the slide and block it at...
€2.13
2,13 € tax excl.
Lower carriage delrin wheel for glass-front cabinets.
Material: Metal, DelrinFinishing: Nichel
Questions (0)
No customer questions for the moment.
Your Question has been successfully sent our team. Thanks for question!
Ask a question
hide form
Italiano
Français
Deutsch
Español
