€25.41
25,41 € tax excl.
Anodized and drilled aluminum track for Koblenz sliding system for doors with a load capacity of 40 kg, series 0400
Black T-shaped lower tab guide for sliding door
Reference:
0810 80x800
black plastic support for lower guide for sliding door with two holes, 5 mm thick
€3.69
3,69 € tax excl.
Add to wishlist
You may also like
other products in the same category:
Out-of-StockSold out
€5.00
5,00 € tax excl.
Materials:
Outer rings and pins in AVP steel - Coating in Nylon 6/6 loaded with fiberglass - Balls in Cr TMP steel.
- Wheel diameter 22 mm(D),
- Internal hole diameter 6 mm(d),
- Inner ring diameter 10...
€109.02
109,02 € tax excl.
Complete kit for sliding glass-front cabinets with 5/6 mm glass thickness.
€40.28
40,28 € tax excl.
Sliding system 0205/1 with trolley for wooden folding door with embossing and with rail 1 mt.
SYSTEM 0200-5/50 capacity 50 kg.
€181.97
181,97 € tax excl.
Magic2 is the multi-patented system, designed and produced by Terno Scorrevoli, totally Made in Italy. A product that integrates the magic of architectural minimalism and the smoothness of an extremely tested system -...
€4.10
4,10 € tax excl.
Wheel with G Groove, used for bathroom sliding doors, shower doors etc.
Material: Nylon Wheel, Brass Core
Total size: 10.5x22.5 mm
Thickness: 6.8 mm
Weight: 60g
Groove width: 5mm
Thread: M4
Length of the...
€28.69
28,69 € tax excl.
Kit includes:
Perforated and anodized aluminum rail reach 40 kg length 150 cm
Sliding carriage (2 pieces)
Door anchor bracket (2 pieces)
Carriage support Screw (2 pieces)
Lower guide (1 pieces)
Holding brake...
€14.75
14,75 € tax excl.
Koblenz adjustable sliding system kit for single hanging door article 1011/8
Track to be purchased separately
The Kit includes :
- Adjustable carriage with 2 bearings (2 pieces)
- Adjustable lower eccentric...
€1.91
1,91 € tax excl.
Side mounting bracket, load capacity 250 kg for KIT 0850/3.
€61.48
61,48 € tax excl.
The kit includes:
- Perforated aluminum track (1 pieces)
- Holding brake (1 pieces)
- Opening mechanism (1 pieces)
- Upper/lower bracket (2 pieces)
- Bracket housing (1 pieces)
- Opening mechanism housing (1...
€4.92
4,92 € tax excl.
Radial ball bearing with seals, replacement for cutter Cmt
Article 791.004.00
Specifications:
D - 19 mm diameter
P - Thickness 7 mm
B - Hole Ø 6,35 mm
€274.00
274,00 € tax excl.
FEATURES:
Steel
Load rating up to 272 kg
100% extension
19.1 mm slide thickness
Slides sold singly
Available in lengths from 254 mm to 1524 mm (SL)
Measures looks image or technical data sheet.
€14.75
14,75 € tax excl.
Pair of sliding guide for drawer (DX/SX) Blum Tandembox Antaro/Intivo - Total extraction - Soft closing
Characteristics:
Capacity 30kg (578) or 50Kg (579)
Length: 270/350/400/450/550/600/650 mm
€51.64
51,64 € tax excl.
3-meter round galvanized guide for Rollin Center Floor sliding doors.
Galvanized guide 55x16x3000 35/10 x Round D.20 Drilled for floor fixing
The new guide designed and built for gates and doors, suitable for...
€51.92
51,92 € tax excl.
Long olive for nylon guide for 452 Combi sliding gates
Diameter Ø 44x220 fixing by M16 bolt
€5.74
5,74 € tax excl.
Upper and lower 3 meter brown nylon channel for sliding system 0310/7 and 0310/9.
Out-of-StockSold out
€3.11
3,11 € tax excl.
Ø 28 Omge rubberized plane bearing
Total thickness 9.5 mm
Rubber thickness 6 mm
€2.87
2,87 € tax excl.
Steel roller with delrin wheel with groove Ø 24 mm hole spacing centre to centre distance 6 cm
€96.72
96,72 € tax excl.
Evolution single door, double-staved metal panels DX51 Z100 with thickness 0.7, anodised aluminum rail AW6060 10 micron, fit for a single door, the doors shall be flat and fit for sliding into a pocket wall. Maximum...
€18.85
18,85 € tax excl.
Sliding system Kit for folding doors with pivot 1133 for doors up to 30 kg.
Minimum thickness of the door 28 mm.
Binary art.2670 to be purchased separately (not included)
€5.74
5,74 € tax excl.
Bottom sliding shoe for custom-made accordion doors, with 12 mm Teflon pin.
The 0700 and 0710 accordion folding systems can be configured in different solutions that vary based on the number of panels to be installed...
€4.84
4,84 € tax excl.
System ROLL-GE 20, Adjustable steel roller with M10 pin.
Wheels Ø 24 mm, material:
Steel (Art.23), Steel-nylon (Art.45), Delrin (Art.1223) to complete crown of spheres.
Carrying capacity: 45 kg (Art.23) - 45 kg...
€157.62
157,62 € tax excl.
Bottom guide 6 meter in silver anodized Aluminum for custom accordion doors.
The 0700 and 0710 accordion folding systems can be configured in different solutions that vary based on the number of panels to be...
€6.48
6,48 € tax excl.
nylon wheel 25mm round gola
specifications:
Diameter 25 mm
Thickness of 9 mm
Round throat diameter 5,3 mm
Hole Ø 5
€30.74
30,74 € tax excl.
Kit includes:
Perforated and anodized aluminum rail reach 40 kg length 190 cm
Sliding carriage (2 pieces)
Door anchor bracket (2 pieces)
Carriage support Screw (2 pieces)
Lower guide (1 pieces)
Holding brake...
€6.48
6,48 € tax excl.
nylon wheel 24 mm round gola
specifications:
Diameter 24 mm
Thickness of 7 mm
Round throat diameter 5 mm - radius 2,5 mm approximately
Hole Ø 5
Out-of-StockSold out
€17.95
17,95 € tax excl.
Lower slider for external door.
L (Left) R (Right)
€10.03
10,03 € tax excl.
Sliding system with lower carriage and upper sliding block for 35mm hole furniture door
The kit art. 0310/9 capacity 43 kg contains:
Lower carriage with Delrin wheel 2 pcs
Upper sliding block 2 pcs...
€8.20
8,20 € tax excl.
Brass bearing wheel for sliding shower 25 or 27 mm
Features:
- Suitable for 4-8mm glass doors
- Material: Brass + Steel + Nylon
- Wheel diameter: 25mm / 27mm
- Thickness 5.5mm
- Double thickness 32 mm
-...
€8.11
8,11 € tax excl.
Sliding trolley with Ø 30 mm wheel and 70x30 mm fixed support for sliding system of furniture doors
Material: Aluminum, Nylon
Measurements as per images.
€155.70
155,70 € tax excl.
Sliding system kit for wardrobe with 3 overlapping doors with 6 air-cushioned stops and 6 snap guides for doors up to 80kg.
Maximum door thickness 28 mm.
the kit does not include the upper and lower rails which...
€19.26
19,26 € tax excl.
The Kit includes :
Upper sliding carriage (1 pieces)
Bottom shoe for rail (1 pieces)
Side zipper (2 pieces)
Central hinge (1 pieces)
Adjustable central hinge (1 pieces)
CHARACTERISTICS:
Function : Allows...
€5.33
5,33 € tax excl.
Nylon wheel Ø 16 mm flat type
Specifications:
- Diameter 16 mm
- Thickness 5.5 mm
- Hole Ø 5 mm
Customers who bought this product also bought:
€25.41
25,41 € tax excl.
Anodized and drilled aluminum track for Koblenz sliding system for doors with a load capacity of 40 kg, series 0400
Out-of-StockSold out
€17.95
17,95 € tax excl.
Lower slider for external door.
L (Left) R (Right)
€15.49
15,49 € tax excl.
Lower slider for internal door.
L (Left) R (Right)
€5.74
5,74 € tax excl.
Bottom floor T-guide article 2855 for 10 mm milled channel.
Spare part for Magic2 sliding door system.
Measures looks image.
€1.16
1,16 € tax excl.
Koblenz side attachment bracket for track 0500, capacity 80kg
€28.69
28,69 € tax excl.
Kit includes:
Perforated and anodized aluminum rail reach 40 kg length 150 cm
Sliding carriage (2 pieces)
Door anchor bracket (2 pieces)
Carriage support Screw (2 pieces)
Lower guide (1 pieces)
Holding brake...
Questions (0)
No customer questions for the moment.
Your Question has been successfully sent our team. Thanks for question!
Ask a question
hide form
Italiano
Français
Deutsch
Español