Waterproofing Bostik liquid rubber

CHARACTERISTICS:

    Seals, protects and repairs
    100% airtight and waterproof
    Permanently elastic: 750% stretch
    Easy to apply
    Adheres to all surfaces.
    Protects against corrosion and erosion
    Resistant to atmospheric agents and UV rays
    Good chemical resistance
    Paintable (always test first)
    Environmentally friendly: water-based, solvent-free, VOC-free (Volatile Organic Compounds) and non-toxic

Suitable for

    Seal, protect and repair virtually all materials such as wood, concrete, stone, metal, zinc, bitumen, EPDM, PVC, etc.
    Suitable for both indoor and outdoor applications, such as bathrooms, roofs, cellars, walls and gardens.
    To waterproof the base of showers, floor joints, gutters, pipes, window frames, skylight joints, objects in contact with water and driving rain against air and water. It is also suitable as a non-slip insulating layer, as protection and coating of untreated metals and woods. It also has good adhesion on PP/PE.

Usage instructions

    Make sure the surface is dry, clean and free from dust and grease. Sand if necessary (e.g. metals).
    Mix the product manually with the help of a stick before use until a homogeneous color is obtained.
    Apply at least 2 layers of product by brush (recommended application), roller or spray, waiting about 10 minutes between the two applications.

    Suggestion

    Use Bostik Liquid Rubber Reinforcing Band in combination with Bostik Liquid Rubber to improve application and hold on cracks, gaps and crevices ensuring optimum thickness and faster run time. Apply Bostik Liquid Rubber Reinforcing Band immediately after applying the first layer of product, press well and immediately cover with the second layer.