€5.66
5,66 € tax excl.
Rubber head - Soft non-slip grip.
Head weight 500 gr
Head dimensions 90XØ60 mm
Total length 290 mm
Stubai Carving mallet in beechwood for woodcarver
Reference:
511002
Carving mallet in beechwood for woodcarvers and sculptors.
Available in 3 sizes:
- Ø 70 mm from 400 g
- Ø 80 mm from 620 g
- Ø 110 mm from 920 g
€21.31
21,31 € tax excl.
Add to wishlist
You may also like
€7.54
7,54 € tax excl.
Rubber head and wooden handle - Head weight 500 gr.
Head dimensions: 100XØ60 mm
Total length: 310 mm
other products in the same category:
€4.10
4,10 € tax excl.
Tempered steel blade, brushed - Resin handle.
Contains one piece per type from sizes 25 - 38 - 75 mm
€1.97
1,97 € tax excl.
Blade length 300 mm - Teeth/inch 24 - Structure and handle in plastic material, steel blade.
€9.83
9,83 € tax excl.
Measure from 4-32mm. 3-surface shank diameter 10mm Suitable for expanding holes in sheet steel, aluminum, copper, plastic and composite materials
€13.03
13,03 € tax excl.
Compressed air gun for pipe cleaners, sink cleaners, drain cleaners, etcWith 4 rubber adapters for shower-bidet-Wc-sink- diameter 20cm- diameter 11.3cm- diameter 6.3cm- diameter 5.2cm
€3.10
3,10 € tax excl.
Indelible marker extra wide tip 14.5 mm blue.
Dries in seconds.
Up to 72 hours without cap - does not dry out.
Can be used on wet, oily, rusty and debris surfaces.
For use on concrete, wood, metal, plywood, OSB...
€13.81
13,81 € tax excl.
Block brush MIX PLUS, pure fair bristles top quality and synthetic fibre, plastic board and wooden handle , epoxy resin, solvent resistant.
Water-based wall paint and quartz for interior and exterior surfaces....
€7.38
7,38 € tax excl.
Manual piston pipe cleaner, sink cleaner, drain cleaner, etc
With 2 rubber adapters for shower-bidet-Wc-sink
- diameter 15cm
- diameter 6.3cm
€27.00
27,00 € tax excl.
This multipurpose knife is suitable for multiple sliced or chopped cuts, especially vegetables.
Knives of BBQ range are expressly engineered and designed for BBQ and meat applications. All our high-quality blades are...
€58.19
58,19 € tax excl.
Klein® magnetic aligners for planer knives have been especially designed for rapid knife positioning after sharpening.
€4.59
4,59 € tax excl.
The Makita B-57548 bit holder converts the SDS-Plus chuck into 1/4 hex screwdriver bits.
This item is to be used in rotation mode only
€8.20
8,20 € tax excl.
Adjustment and closure on different sizes with a single tightening,
the two jaws move parallel to each other,
the closing system tightens in any position,
laminated steel structure.
€8.11
8,11 € tax excl.
Indelible marker extra fine tip 0,6 mm black.
Dries in seconds.
Up to 72 hours without cap - does not dry out.
Smudge resistant.
€45.00
45,00 € tax excl.
Makpac Organizer case equipped with 13 removable and interchangeable trays to meet the user's needs. Possibility of connection to the Makpac or on the trolley. Its transport is facilitated thanks to the presence of...
€22.13
22,13 € tax excl.
Self-adjusting chrome vanadium steel pliers with patented locking mechanism, 51RC hardened teeth for maximum product life and absorption spring. Automatic adjuster that allows the jaws to automatically adjust to any...
€8.20
8,20 € tax excl.
Bit holder with 1/4" drive, Bit holder adapter 1 F/F 6.3 mm-1/4", 9 hexagon sockets from 5 to 13 mm, 5 bits for slotted screws, 3 phillips and 3 pozidriv.
€34.34
34,34 € tax excl.
Complete with fixed auto-darkening glass (Automatic LCD Technology) 90x110mm - Optical class 1/3/1/3 - light / dark 0.4 ms. mma, mig-mag.
€7.38
7,38 € tax excl.
Knife sharpening with a special steel and pottery for a perfect sharpening on all kinds of scissors and knives.
€6.97
6,97 € tax excl.
Polished steel head - Flat round hammer and nail remover pen - Soft non-slip handle.
Head weight 500 gr
Head size lxhxp 125x50x30 mm
Total length 310 mm
€8.44
8,44 € tax excl.
Valex 8-piece combination wrenches, steel body, sizes from 8 to 22 mm
FEATURES
Measurements: 8-10-11-13-14-17-19-22mm
15 ° inclined heads
Steel body
Satin finish
Plastic support
€21.23
21,23 € tax excl.
Replacement Blade in blister 3001 / B for 3101 and 3104 Lowe shears.
€18.28
18,28 € tax excl.
Magnesium lever clamp with quick, light and delicate clamping. Ideal for assembly work or for simultaneous use of multiple clamps. With serrated VIBRAFIX mechanism, clamping force of 1200 N which can be actuated with...
€6.15
6,15 € tax excl.
Valex double fork keys 8 piece
Measurements: 6x7-8x9-10x11-12x13-14x15-16x17-18x19-20x22 mm
Forks inclined at 15 °
Steel body
Satin finish
Supplied with plastic support.
€16.31
16,31 € tax excl.
5-layer garden hose for hobby and professional use - Revolutionary "LIGHT & STRONG" system ensuring high wall thickness combined with unmatched lightness - Flexibility, handling, and elasticity - Does not bend,...
€12.21
12,21 € tax excl.
Pruning shears 21 cm Stocker
Length : 21 cm
Weight : 302 g
€29.51
29,51 € tax excl.
Speeddrive ratchet mechanism: doubles the speed and efficiency of the screwdriver
Ergonomic handle
3 double tip inserts (Ph.1 + 2 / Pozi 1 + 2 / cut 4 + 5.5) inserted in the handle housing
€9.75
9,75 € tax excl.
Chrome vanadium steel body - Head finish: pearl-nickel-plated - Soft bi-material handle.
length 260 mm
maximum opening 52.0 mm
net weight 400 g
€2.46
2,46 € tax excl.
Plastic handle ergonomic grip - Fabric height: 6 mm - Non-drip short acrylic shaved - Great finish with high gloss, stain-resistant paints.
Dimensions:
Roller width 100 mm
Roller diameter 27 mm
€22.05
22,05 € tax excl.
Stanley multi-purpose planer with interchangeable blades
Features:
Double cutting position: standard central and advanced bevel.
Blade that can be positioned as a ball or side plate.
Base 150 mm, iron 50...
€15.69
15,69 € tax excl.
Anvil cutter, forged steel, painted, weight 0,8 Kg.
€31.89
31,89 € tax excl.
Swivel box end - 15° angled open end - Chrome vanadium steel body - Satin finish.
Sizes: 8 - 10 - 13 - 17 - 19 mm
€5.08
5,08 € tax excl.
Heavy double pipe wrench, straight hexagonal mouth, polygonal bent mouth with through hole, body in chrome vanadium steel, polished finish.
Key size: 6-7- 8-9-10-11-12-13-14-15-16-17-18-19 mm
Key length: from 110...
€2.20
2,20 € tax excl.
Resistorx six-pointed star-shaped socket screwdriver with chrome vanadium steel blade - Burnished magnetic tip - Dimensions indicated on the head - Soft bi-material handle with thumb rest points for a safer grip....
Questions (0)
No customer questions for the moment.
Your Question has been successfully sent our team. Thanks for question!
Ask a question
hide form
Italiano
Français
Deutsch
Español
