Out-of-StockSold out
€327.87
327,87 € tax excl.
Utensile Multifunzione Fein FMM 250Q con regolatore numero di giri
Makita DP4003K drill driver
Reference:
DP4003K
Characteristics:
High tightening torque 73 Nm
Direct drive gears for high tightening torque
Large side handle
Electronic switch
Switch locking device for continuous use
Ideal for wood screws up to 400 mm x Ø 10
Technical data:
Wood hole capacity Ø 38 mm
Steel hole capacity Ø 13 mm
Power absorbed 750W
No-load speed 0-600 rpm
Chuck Ø 13 mm (1/2 x 20 F)
Weight 2.4 kg
Accessories supplied:
Side handle
Carrying case
€255.94
255,94 € tax excl.
Add to wishlist
other products in the same category:
€415.36
415,36 € tax excl.
Makita JS3201J shear
Extended warranty for 3 years
Features:
Knife System with 4 cutting edgeshand protection for user safety during cutting
Technical data:
Steel cutting capacity 2.5 mmsteel cutting capacity 1.5...
€1,221.31
1.221,31 € tax excl.
Characteristics:Low weight and foldable legs for easy and convenient transportationQuick conversion from miter saw to table sawElectronic speed controlSoft startSturdy die-cast aluminum tableTechnical data:Power...
€583.63
583,63 € tax excl.
Aspirator 1200W 34 L, Filter class L - Wet & Dry VC4210LX
Automatic filter cleaning system
stainless steel drum
Suction flow regulator
air flow sensor
7.5 m power cable
Extensible warranty up to 3 years
€188.52
188,52 € tax excl.
Features: - Depth adjustment in 3 positions - Pliers Ø 8 mm - Depth of cut 0-35 mmTechnical data: - Cylindrical shank Ø 8 mm - Stroke 35 mm - Power consumption 900 W - No-load speed 27000 rpm - Weight...
€96.53
96,53 € tax excl.
Characteristics: New elastic transmission system Super Joint System (SJS II) Protective coating for armature and stator Slow start - Constant speed under loadTechnical data: Rated power 1100W Idle speed...
€11.39
11,39 € tax excl.
Instant soldering iron 100W
FEATURES
Power: W 100
Heating: 25 sec
Temperature ° C: 390 °
€267.21
267,21 € tax excl.
Mixer suitable for the preparation and mixing of colours, glues, tile glues etc. up to quantities of approximately 50 kgCharacteristics: Electronic switch Soft start Constant speed under load Double...
€204.10
204,10 € tax excl.
Blade lock for easy blade replacement
Adjustable angle and depth of cut
- Power consumption 2,000 Watts
- Weight (EPTA) 6.8 kg
- Ø blade 235 mm
- Blade hole 30 mm
- 90 ° cut 85 mm
- 45 ° cut 60 mm
Out-of-StockSold out
€373.77
373,77 € tax excl.
Characteristics: Drill with 4 mechanical speeds Permanent arming key for continuous use Side handleTechnical data: Wood hole capacity Ø 30 mm Steel hole capacity Ø 13 mm Power absorbed 650W Idle...
Out-of-StockSold out
€815.57
815,57 € tax excl.
Tapping fast and precise with reverse gear for work times smaller.
(supplied without spindle)
€97.54
97,54 € tax excl.
Impeller housing in stainless steel, corrosion-resistant – Water filling/drainage cap – 1" female inlet and outlet connection – Classic garden pump, allows you to draw water from wells, cisterns, fountains, ponds, or...
€179.51
179,51 € tax excl.
Air compressor Fini Amico 50 Liters
- 2 Hp engine
- Tank 50 lt
- from 1.5 kW
Out-of-StockSold out
€279.00
279,00 € tax excl.
Starter 12V portable car Kraftwerk 31305 for emergency start, as an additional power source for vehicles.
€359.00
359,00 € tax excl.
Impact mass capable of developing 3.6 J
720 W of power
Variable speed switch for maximum control
Full metal gearbox for maximum strength
Additional adjustable handle according to the applications to be performed...
€277.87
277,87 € tax excl.
Features:
Hammer with ergonomic handle equipped with quick coupling bit holder for SDS-Plus drills
Motor power of 800W
Adjustable speed between 0 and 1,200 rpm
Blow power 2.4 J
3 functions: rotation,...
€266.39
266,39 € tax excl.
Characteristics: Innovative anti-vibration system for effortless work Ergonomic handle with soft non-slip rubber Integrated extraction: effective dust extraction through the support plate Possibility of...
€983.61
983,61 € tax excl.
AVR system: automatic regulation of the output voltage - Automatic shutdown for overloads and low oil level - Voltmeter.
Power KVA max 5.5
Engine 13 Hp
Displacement 389 cc
Voltage 230V
Single-phase synchronous...
€547.35
547,35 € tax excl.
Characteristics: Engine brake Adjustable guide references for better control of perpendicular or inclined cuts Shaft lock for easy blade replacement Easily readable graduated scales to facilitate inclined...
€42.54
42,54 € tax excl.
Two-hand start - Quick blade stop - Double-action blades with safety profile - Double-sided sharpened knives - Blade protection with sheath.
Power 520W
Cutting capacity 16 mm
Blade length 53 cm
No-load strokes/min...
Out-of-StockSold out
€171.31
171,31 € tax excl.
Smerigliatrice angolare 1400 watt con testata extra-piana, 125 mm
Out-of-StockSold out
€425.41
425,41 € tax excl.
Fini Compressor MK Advanced 25 Litre single-stage two-cylinder single phase
€302.46
302,46 € tax excl.
Makita LW1400 portable cut-off saw 355 mm
Tool-less adjustment of guide plate
Tool-less wheel change
Large spark guard
Quick release vice
Carry handle for easy transport
Pin locking device
Double Insulation...
€26.64
26,64 € tax excl.
Variable speed with preselection of the number of revolutions - Blade change with tool - Front blowing of chips.
- power W 450
- idle strokes / min 500-3,000
- switch block YES
- 0/45 ° inclined cut
- wood cut...
€30.25
30,25 € tax excl.
Power 105W - Paper size 140x100mm with velcro - Supplied with abrasive paper and polishing accessories.
- Oscillations / min 12.000- Switch block YES- Ø orbits mm 0,9- VELCRO paper fixing- Dust extraction PREPARED-...
€131.15
131,15 € tax excl.
Coaxial lubricated compressor with pressure regulator.
Tank 6 liter
Power 1/0.75 Hp/kW
Induction motor
Rpm 2850
Cast iron cylinder
Pressure 8 max bar
Air flow 126 l/min
Output with Quick coupling
Double...
€200.00
200,00 € tax excl.
Features:
Possibility of adjusting the pendulum with 4 orbits and with blade change without tools
Aluminum plate adjustable from 0° to 45° on 2 sides
Speed regulator, slow start and constant speed under load for...
€138.52
138,52 € tax excl.
Ventilated, lightweight, and compact welder - High welding current stability under power variations - Arc force, hot start, and anti-stick devices - Thermostatic protection for overvoltage, undervoltage, overcurrent,...
€309.08
309,08 € tax excl.
Features: - Knife system with 4 cutting edges - Hand protection for the user's safety during cuttingTechnical data: - Steel cutting capacity 1.6 mm - 1.2 mm stainless steel cutting capacity - Aluminum...
€92.99
92,99 € tax excl.
Characteristics: Ergonomic handle with soft grip covering Effective dust extraction through the support plate Speed regulator Paper clip Aluminum supports Constant speed under loadTechnical data:...
€154.92
154,92 € tax excl.
Circular saw for wood 1200W 190 mm HS7601J Blade guard with large suction nozzle Cutting depth adjustment Ergonomic handle with soft grip covering Large two-finger switch for more comfortable use Safety...
Questions (0)
No customer questions for the moment.
Your Question has been successfully sent our team. Thanks for question!
Ask a question
hide form
Italiano
Français
Deutsch
Español
